Numerics Table
Press the Numerics shortcut button to show or hide the Numerics measurement table. If you have not yet configured measurements, it will display
the Numerics dialog for you to choose the voltage, current, power (real, apparent, and reactive), phase angle/power factor, efficiency, and mechanical
measurements shown on the table. The table is displayed with the acquisition waveforms.
E
A
D
B
C
A
Choose the input sources to display
on the table (rows).
B
Choose the measurements to
display for each input (columns).
C
Optionally, change units displayed
for mechanical measurements.
D
Up to 12 measurements may be
added to table for each source.
E
Color overlay marks measurement
cycle on Sync signal waveform.
BASICS
29