Page 1
Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Items #52831 & #52832 SAVE THESE IMPORTANT SAFETY INSTRUCTIONS...
Page 2
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Intended Use The Strongway Gable Exhaust Fan provides continuous operation in workshops, barns, poultry houses, greenhouses, garages, and anywhere air movement controls condensation and reduces stagnant air. Technical Specifications Property Specification #52831 #52832 Air Delivery (CFM) 1200 1600 Volts 120V...
Page 5
⚠WARNING This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury.
⚠WARNING ELECTRICAL SAFETY Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. ⚠CAUTION FAN USE AND CARE Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function.
Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
Page 8
9. Turn off the wall switch prior to servicing unit. To avoid personal injury, wall switch must be turn off before servicing since the built-in theraml protection may turn on the circulator automatically. Note: The control box of the #52831 with thermostat only was mounted on the unit directly. Page 8 of 12...
#52831 diagram for #52832 1. Parts replacement and troubleshooting to be performed only by qualified personnel. 2. Do not depend on any switch as the sole means of disconnecting power when installing or servicing the fan.
5. The propeller and motor should be cleaned periodically to prevent overheating, and/or operating in an imbalanced condition. 6. Do not repair propeller if it becomes damaged. The propeller is accurately balanced at the factory and should be replaced if damaged. 7.
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 12
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 12 of 12...