Page 1
FC 8025 & FC 8025L (for use with item# FC 2000 & FC 4000) includes trunk harness, abductor, & lateral supports EU Authorized Representative Drive International, LLC Globe Lane - Stockport DUKINFIELD SK16 4RE, GB...
Page 2
support kit accessory trunk harness Attach shoulder straps to Velcro strips on back of chair (figure 1). Adjust to desired height. Open harness belt and loop around the back of the chair. Adjust and close to desired width (figure 1). Upon initial use, adjust belt clip (A) to appropriate size (figure 2).
Page 3
support kit accessory lateral support Remove screws (C) (figure 1) on back support. Mount lateral support bar. Ensure that the black washer is in between the back support and the lateral support bar (figure 4). Loosen height/width adjust knob (D) (figure 5) and insert lateral support.
Page 4
Your Drive brand product is warranted to be free of defects in materials and workmanship for two years from the date of the original consumer purchase. This device was built to exacting standards and carefully inspected prior to shipment.