Connection Unit Interface - SolarEdge SE3680H Installation Manual

Connection Unit Interface

EV Charger cable connector: Used for connecting the EV charger cable to the
inverter
EV Charger LED indicator: Three LEDs indicate the EV Charger statuses.
The following table lists the LED indications when the EV Charger Cable is connected to
the inverter and activated (refer to the EV Charger Cable Installation Guide supplied with
the EV Charger Cable):
Color
All LEDs
Red
Blue
Green
AC output / input : For connection of the AC grid
DC input (MC4 connectors): For connection of the PV installation
Communication gland: For connection of inverter communication options. Refer
to Setting Up Communication to the Monitoring Platform on page 49 for more
information.
(1) Lights ON for 1000mS and OFF for 1000mS
(2) Lights ON for 100mS and OFF for 5000mS
EV Charging Single Phase Inverter Guide MAN-01-00583-1.5
Figure 7: LEDs
Description
OFF - No AC power
ON - Error
ON - the EV Charger is communicating with the inverter
OFF - the EV Charger is not communicating with the inverter
ON - Charging
(1)
Blinking - the EV Charger is plugged in but not charging
(2)
Flickering - the EV Charger is ready to charge but not plugged in
Chapter 3: Installing the Inverter 23