Advertisement
Quick Links
WAP-5903 AC1200 Dual Band WiFi Mesh-Enhanced Extender
A
Understanding the WAP-5903 WiFi Mesh-Enhanced Extender
Front
LED Color
Green
Blue
Red
Green
&
Blue
Green
&
Blue
&
Red
Port/Button
Reset
UPLINK
LAN
Quick Install Guide
LED
POWER PORT
LED Status
Description
On
The device is connected via Ethernet cable
Blinking
The mesh system is processing
On
The device is connected to WiFi, and the connection quality is good
Blinking
The mesh system is processing
On
The device is connected to WiFi, and the connection quality is weak
Blinking
The mesh system is processing
1. The device is booting up and on stand-by
Blinking
2. The device has lost the uplink connection
1. The device is upgrading the firmware
Blinking
2. The device is under reset to default process
Description
Factory Reset Function: Press and hold this button for over 10 seconds
Connect this port to the LAN port of the Comtrend Gateway/modem/router.
This port it used for Ethernet Pairing in a Comtrend WiFi mesh scenario.
Optional: Use this port to connect an Internet- enabled device (e.g. laptop, set-top-box, etc.).
Back
LAN
RESET
UPLINK
Bottom
Page 1
Advertisement
Related Manuals for Comtrend Corporation WAP-5903
Summary of Contents for Comtrend Corporation WAP-5903
- Page 1 Quick Install Guide WAP-5903 AC1200 Dual Band WiFi Mesh-Enhanced Extender Understanding the WAP-5903 WiFi Mesh-Enhanced Extender Front Back Bottom POWER PORT RESET UPLINK LED Color LED Status Description The device is connected via Ethernet cable Green Blinking The mesh system is processing...
- Page 2 WAP-5903 is paired and grouped in the same WiFi mesh network as the Comtrend gateway. 4. If you are setting up more than one WAP-5903, then please follow instructions 1-3 with the additional WAP- 5903 units. Page 2...
- Page 3 Deploy the WiFi Mesh Extender 5. After the WAP-5903 is paired, move it to the nearest outlet where additional WiFi coverage is needed. Once it is plugged in, wait for the LED to light up solid blue, which means it is ready.
-
Page 4: Setup The Wifi Network
4 digits of the device’s MAC number.) 5. When you are prompted to input the security key, the WiFi Key (password) can be found on the label at the back of the WAP-5903 device. 6. Click the OK button to connect to the network. - Page 5 9. After logging into the Web page, input the new SSID for both the 2.4GHz and 5GHz fields. The user can setup a new password by inputting it in both the Key fields. Click the Apply/Save button to complete setup. 10. After applying the wireless setting the WAP-5903 will reboot. When the WAP-5903’s LED is solid green it means it is ready.
- Page 6 11. You can now connect the additional WAP-5903. Power on the additional WAP-5903 by connecting one end of the Power Adapter into the Power Port of the WAP-5903 and the other end into an outlet. The Ethernet Pairing will automatically start processing and the WAP-5903’s LED will begin blinking green.
-
Page 7: Federal Communication Commission Interference Statement
Federal Communication Commission Interference Statement Radio 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. -
Page 8: Supplier's Declaration Of Conformity
Supplier’s Declaration of Conformity Company: Comtrend Corporation - North America Address: 530 Technology, Suite 100, Irvine CA 92618 Certify and declare under our responsibility that the following equipment: Product Name: AC1200 Dual Band WiFi Mesh Extender Model Name: WAP-5903 Brand Name: COMTREND...