Table of Contents
Advertisement
b.
Release the ZIF connector (2) to which the webcam module cable is connected, and then disconnect
the webcam module cable from the webcam module.
c.
Remove the webcam module.
The webcam module is available using spare part number L90439-001.
17.
Remove the webcam module cable by following these steps:
a.
Detach the webcam module cable (1) from the display back cover. (The webcam module cable is
attached to the display back cover with double-sided adhesive.)
b.
Release the webcam module cable from the retaining clips (2) built into the left hinge area of
the display back cover.
Component replacement procedures
45
Hide quick links:
Advertisement
Table of Contents
