Table of Contents
Advertisement
11.
Remove the display assembly (3).
NOTE:
Steps 12 through 19 apply only to computer models equipped with a non-touchscreen display
assembly. See steps 8 through 11 for display assembly removal instructions for computer models
equipped with a touchscreen display assembly.
12.
If it is necessary to replace the display assembly or any of the display assembly internal components,
remove the hinge cover by following these steps:
a.
Close the computer.
b.
Turn the computer upside down with the front toward you.
c.
Use a case utility tool (1) or similar thin, plastic tool to separate the left (2) and right edges of
the hinge cover from the display assembly.
Component replacement procedures
39
Hide quick links:
Advertisement
Table of Contents
