HP 14 Maintenance And Service Manual page 60

e. When installing the display panel, apply the adhesive in the location as shown in the following
illustration.
9. If you need to remove the hinges:
a. Remove the Phillips M2.0 × 2.5 screw (1) from the bottom of each hinge.
b. Remove the two Phillips M2.5 × 2.5 screws (2) from the bottom of each hinge.
c. Remove the Phillips M2.5 × 3.0 screw (3) from the top of each hinge.
d. Remove the display hinges from the display back cover (4).
The display hinges are available as spare part number L64910-001.
52 Chapter 5 Removal and replacement procedures for authorized service provider parts