6.
Remove the right speaker from the computer (6).
Reverse this procedure to install the speakers.
Display assembly
To remove and disassemble the display assembly, use these procedures and illustrations.
NOTE:
Display assemblies are offered as spare parts only at a subcomponent level.
Before removing the display panel, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
4.
Remove the power button/card reader board (see
Remove the display assembly:
1.
Disconnect the display cable from the system board (1), and then remove the cable from the clips in the
left hinge (2).
46
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
29).
Battery on page
31).
Power button/card reader board on page
29).
37).