HP 14 Maintenance And Service Manual page 53

Table 5-12 Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the fan (see
5. Remove the heat sink (see
Remove the speakers:
1. Disconnect the antennas from the WLAN module (1), and the remove the antenna cables from the
channel in the left speaker (2).
2. Disconnect the speaker cable from the system board (1).
3. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the speakers to the computer.
4. Lift the left speaker up from the computer (3), remove the speaker cable from the clips in the computer
chassis (4).
5. Disconnect the cable from the ZIF connector on the power button/card reader board (5).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 31).
Fan on page 39).
Heat sink on page 40).
29).
Component replacement procedures
Spare part number
M13562-001
29).
45