Fan - HP 14 Maintenance And Service Manual

Table 5-8 Fingerprint reader board description and part number
Description
Fingerprint reader board
Fingerprint reader board cable
Before removing the fingerprint reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the fingerprint reader board:
1. Remove the Phillips M2.0 × 2.0 screw (2) that secures the fingerprint reader bracket, and then remove
the bracket (2).
2. Disconnect the cable from the ZIF connector on the fingerprint reader board (3).
3. Remove the fingerprint reader board from the computer (4).
Reverse this procedure to install the fingerprint reader board.

Fan

To remove the fan, use this procedure and illustration.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 31).
29).
Component replacement procedures
Spare part number
M13559-001
M13560-001
29).
39