Solid-State Drive - HP 14 Maintenance And Service Manual

Solid-state drive

To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-5 Solid-state drive descriptions and part numbers
Description
1 TB, PCIe
512 GB, PCIe
256 GB, PCIe
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
2. Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 29).
Battery on page 31).
Spare part number
L85370-005
L85364-005
L85354-005
L85346-005
29).