Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19a
Advertisement
Table of Contents
Summary of Contents for Franklin 70027
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
Be aware of dynamic loading! These carry important safety information. Sudden load movement may briefly create If unreadable or missing, contact excess load causing product failure. Harbor Freight Tools for a replacement. Page 2 For technical questions, please call 1-888-866-5797. Item 70027... - Page 3 7. Remove the alignment Bolt from the top of the right side, reinsert it through the same hole from the outside, and secure with a Nut. 13. Repeat steps 11 and 12 to secure the other Wheel. Item 70027 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Frame to Handle. Check that the Frame 2. Lower the Frame so that the Steel Plate (16) is connected securely to the Handle. rests on the Handle crossplate. See below. Ring Steel Plate Frame Handle Handle Page 4 For technical questions, please call 1-888-866-5797. Item 70027...
- Page 5 2 Wheel Assisted Hand Truck Position With Hand Truck in upright position, fold down Nose Plate Extension (6) so that it rests horizontally on Nose Plate (1). See below. Nose Plate Extension Item 70027 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 6 For technical questions, please call 1-888-866-5797. Item 70027... -
Page 7: Assembly Diagram
Assembly Diagram Item 70027 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.