Ricoh TK2000 Installation Manual

Paper Feed Unit TK2000
(Code: M406)
For Machine Code: M109
INSTALLATION GUIDE
CAUTION:
• The printer weighs approximately 41
kg (90.4 lb.). When moving the printer,
use the inset grips on both sides, and
lift slowly in pairs. The printer will
break or cause injury if dropped.
• Lifting the paper feed unit carelessly
or dropping may cause injury.
• It is dangerous to handle the plug with
wet hands. Doing this may result in re-
ceiving an electric shock.
• Before moving the printer, unplug the
power cord from the wall outlet. If the
cord is unplugged abruptly, it could
become damaged. Damaged plugs or
cords can cause an electrical or fire
hazard.
• When attaching multiple options,
attach the paper feed unit first.
• To attach two or three paper feed
units at the same time, first stack
them one upon the other, and then
attach them as a single unit.
• Do not place the printer directly on
the floor.
Check the contents of the package.
Turn the printer off and unplug
the power cord.
Remove the packaging from the
paper feed unit.
Lift the printer using the inset
grips on both sides of the printer.
When moving the printer, do not
hold on the following parts as doing
so could cause a malfunction:
• The handle onto the standard
paper feed tray.
• The underside of the bypass tray.
CSJ231
CSJ220
1