Page 1
Steel Beam Clamp Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Items #52419 #52420 #52421 #52422 SAVE THESE INSTRUCTIONS...
Page 2
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 5 Specific Operation Warnings ....................... 6 Before Each Use ............................ 6 Operating Instructions .......................... 7 Maintenance ............................7 Parts Diagram ............................8 Parts List ..............................8 Replacement Parts ..........................
Intended Use Compact and easy to install with minimum headroom, the Strongway Beam Clamp adjusts in seconds to fit a variety of girder widths. Its all-steel construction is built for long-lasting strength. Technical Specifications Item# Capacity (ton) Flange Width (inches)
Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this beam clamp. Always be aware of the environment and ensure that the beam clamp is used in a safe and responsible manner.
⚠CAUTION BEAM CLAMP USE AND CARE Do not force the beam clamp. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. ...
7. Regularly inspect beam clamps for wear, damage, distortion, cracks, and defects likely to cause accidents. If any defects are found, remove the beam clamp from service and refer to a competent person. 9. Only an experienced operator should rig the use of several machines to move a single load. All the necessary precautions should be taken to carefully ensure the distribution of the loads and to avoid overloading a single machine.
Parts Diagram Parts List Part Number Part Description Quantity Side Plate Stay Lever Thread Spindle Equalizer Pin Lever Handle Link Cover Socket Head Cap Screw Screw Mandrel Dexter Thread Spindle Handle Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. ...
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 10
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 10 of 10...