TP-Link RE505X Quick Installation Manual

Quick Installation Guide
Range Extender
RE505X
2
Set Up the Extender Via the Tether App
1.
Get the up-to-date Tether app from the
Apple App Store or Google Play, or simply
scan the QR code.
OR
Other Setup Methods:
You can also set up the extender via the WPS button or via a web browser. For details, please refer to the user guide at
https://www.tp-link.com/support.
3
Relocate
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the
relocate the extender closer to the router to achieve better signal quality.
Tip: For more intuitive location assistance, access extender settings via the Tether app and go to
Tools > Location Assistant.
Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The password of your extended network is the
same as your host router.
Tip: You can also set up the extender in Access Point mode to transform your existing wired
network to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.
2.
Launch the Tether app. Tap the
on the upper-right corner and select
Range Extender.
No devices found.
Choose your device type
LED turns solid blue. If it doesn't,
1
Power On
Plug the extender into a power outlet next to your router. Wait until
its Power LED turns solid on.
button
My Devices
Router
Range Extender
Archer AX11000
Archer C5400X
Next to
3.
Follow app instructions to complete the
setup. The LED should turn solid on,
indicating successful connection to your
router.
Note: If the LED does not turn solid on, please
refer to FAQ > Q2.
Solid On
Router
Halfway
Smartphone Tablet
Smart TV Game Console
Solid On
Blue: Suitable location
Red: Too far from router
Devices
Laptop
Desktop