Page 1
4000 lb. Adjustable Gantry Crane Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #52523 SAVE THESE INSTRUCTIONS...
Page 2
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Safety Labels ............................6 Assembly Instructions .......................... 6 Operating Instructions .......................... 8 Maintenance ............................9 Parts Diagram ............................10 Parts List .............................. 11 Replacement Parts ..........................11 Limited Warranty ..........................
Intended Use The Gantry Crane is ideal for shops where heavy level lifting is essential. Technical Specifications Capacity: 2 Ton Adjustable Height: 7’ 11” - 11’ 9” Casters: 5” Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
Page 5
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to other cutting tools and rotating parts. ...
Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the crane without the guards in place. Safety Labels Assembly Instructions WARNING...
Page 7
Assemble the crane loosely until the entire assembly is complete. Make certain that you have a large, clean, and uncluttered area for assembly. As the crane is large and heavy, you may have to lay out the different parts on their sides, and tighten and erect the entire assembly once complete. Step 1) Attach two Plates (#20) from two sides to the one end of the Crossbeam (#19).
Step 5) Attach two Support Tubes (#22) to each Outer Vertical Post Assembly (#23). Insert the Bolt (#5) through the top of the Support Tube, and through the Eyelet. Slip on a Washer (#6) and Spring Washer (#7) and secure with the Nut (#8). Attach the other end of the Support Tube to the Base Assembly with Bolts, Washers, Spring Washers, and Nuts.
Step 3) Raising and lowering the Crossbeam requires two people. There is a Handle (#27) on each of the Outer Vertical Post Assemblies. To raise the Crossbeam, press the handle and the Inner Vertical Post will be up by one hole, insert the other Pin into this hole to hold the position.
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 13
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 13 of 13...