Card reader board
Table 5-15
Card reader board description and part number
Description
Card reader board
Before removing the card reader board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the optical drive (see
5.
Remove the solid-state drive (see
6.
Remove the system board (see
Remove the card reader board:
1.
Remove the Phillips M2.0 × 3.5 screw (1) that secures the board to the computer.
2.
Remove the card reader board from the computer (2).
Reverse this procedure to install the card reader board.
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
30).
Optical drive and bezel on page
Solid-state drive and Optane Memory Module on page
Optical drive and bezel on page
Spare part number
L52802-001
26).
27).
31).
31).
38).