Privacy board
NOTE:
The privacy board spare part kit does not include the cable. The privacy board cable is available using
spare part number L53278-001.
Table 5-10
Privacy board description and part number
Description
Privacy board
Before removing the privacy board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the privacy board:
1.
Disconnect the cable from the ZIF connector on the board (1).
2.
Remove the Phillips M2.0 × 3.5 screw (2) that secures the board to the computer.
3.
Lift the board out of the computer (3).
Reverse this procedure to install the privacy board.
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
30).
Spare part number
L52803-001
26).
27).