Touchpad - HP ENVY 17m Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available
using spare part number L52655-001.
Table 5-9 TouchPad description and part number
Description
TouchPad
Before removing the TouchPad , follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the TouchPad:
1. Disconnect the cable from the ZIF connector on the TouchPad (1).
2. Remove the four Phillips M2.0 × 2.5 screws (2) that secure the TouchPad bracket to the computer.
3. Remove the TouchPad bracket from the computer (3).
4. Remove the three broadhead Phillips M2.0 × 2.5 screws (4) that secure the TouchPad to the computer.
5. Remove the TouchPad from the computer (5).
Reverse this procedure to install the TouchPad.
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 30).
Spare part number
L53699-001
26).
27).
Component replacement procedures 43