Usb Board - HP ENVY 17m Maintenance And Service Manual

USB board

NOTE: The USB board spare part kit does not include the cable. The cable is available using spare part
number L52658-001.
Table 5-8 USB board description and part number
Description
USB board
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the USB board
1. Disconnect the cable from the ZIF connector on the board (1).
2. Remove the Phillips M2.0 × 4.0 screw (2) that secures the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the USB board
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 30).
Spare part number
L52650-001
26).
27).