Solid-State Drive And Optane Memory Module - HP ENVY 17m Maintenance And Service Manual

Solid-state drive and Optane Memory Module

Table 5-6 Solid-state drive descriptions and part numbers
Description
512 GB, PCIe, Gen 3 × 4
512 GB, PCIe, value
256 GB, PCIe, Gen 3 × 4
256 GB, PCIe, Gen 3 × 2
128 GB, SATA-3, TLC
32 GB/512 GB, PCIe (Optane Memory Module/solid-state drive combination drive)
16 GB, PCIe (Optane Memory Module)
Solid-state drive module foil cover
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the solid-state drive:
1. Lift the foil up on the connector side of the drive (1).
2. Remove the Phillips M2.0 × 2.5 screw (2), and then pull the solid-state drive module from the socket (3).
Reverse this procedure to install the solid-state drive.
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 30).
Spare part number
L52457-001
L53277-001
L52455-001
L52456-001
L52454-001
L57592-001
L52458-001
L52664-001
26).
27).