Hard drive, drive rubber holder, and cable
Table 5-5
Hard drive, drive rubber holder, and cable descriptions and part numbers
Description
Hard drive, 1 TB, 7200 rpm (includes foil cover)
Hard drive rubber holder
Hard drive connector/cable
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the hard drive:
1.
Disconnect the hard drive cable from the system board ZIF connector (1).
2.
Lift the hard drive assembly out of the computer (2).
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
30).
Spare part number
L23942-007
L52662-001
L52656-001
26).
27).
Component replacement procedures
35