Connecting The 19" Slide-In Module 4 To 20 Ma; Grounding Concept Of 19" Slide-In Module 4 To 20 Ma - Siemens SIPART PS2 Series Operating Instructions Manual

Positioner with remote control electronics
F.2 19" slide-in module
①
②
③
Figure F-1
①
③
②
Figure F-2
F.2.2

Connecting the 19" slide-in module 4 to 20 mA

F.2.2.1

Grounding concept of 19" slide-in module 4 to 20 mA

NOTICE
Interference
To dissipate interference pulses the positioner components must be connected to an
equipotential bonding cable (ground potential) using a low resistance.
● Connect the positioner 6DR5910 according to the grounding concept described below.
312
19" slide-in module 4 to 20 mA
Sub-D 15-pin socket connector for cable to
the valve
Sub-D male connector 9-pin for cable to the
control system
Device view of 19" slide-in module 4 to 20 mA, rear view
19" slide-in module 4 to 20 mA
Channel 1
Display
Device view of 19" slide-in module 4 to 20 mA, front view
④
Channel 3
⑤
Channel 2
⑥
Channel 1
④
Channel 2
⑤
Channel 3
⑥
Input keys
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE