Electrical Data For Pressure Sensor Module; Communication (Hart) - Siemens SIPART PS2 Series Operating Instructions Manual

Technical data

12.8 Communication (HART)

12.7

Electrical data for pressure sensor module

Basic electronics for the pressure sensor module
6DR51.. -Z P01 und -Z P02 HART, non-Ex
6DR51.. -Z P01 und -Z P02 HART, Ex
Current input I
W
● Rated signal range
● Test voltage
● Digital input DI1 (terminals
9/10; galvanically connec‐
ted to basic device)
Current to maintain the auxiliary
power
Required load voltage U
B
responds to Ω at 20 mA)
Static destruction limit
Effective inner capacitance C
Effective inner inductance L
For connecting to circuits with
the following peak values
12.8 Communication (HART)
HART communication
HART version
PC parameter assignment soft‐
ware
248
Basic electronics
without explosion
protection
(cor‐ 9.4 V (= 470 Ω)
± 30 V
-
i
-
i
-
SIMATIC PDM; supports all device objects. The software is not included in the scope of
Basic electronics
with explosion pro‐
tection Ex "db"
4 ... 20 mA
840 V DC, 1 s
Suitable only for floating contact; max. contact load
< 5 μA with 3 V
≥ 3.6 mA
9.4 V (= 470 Ω)
± 30 V
-
-
-
7
delivery.
Basic electronics Basic electronics
with explosion pro‐ with explosion pro‐
tection Ex "ia", tection Ex "ic", "ec",
Ex "db ia" "tb"
9 V (= 450 Ω) 9 V (= 450 Ω)
- -
12.2 nF "ic": 12.2 nF
105 µH "ic": 105 µH
U ≤ 30 V "ic":
i
I ≤ 100 mA U
i i
P ≤ 1 W I ≤ 100 mA
i i
"ec"/"t":
U
n
I ≤ 100 mA
n
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
≤ 30 V
≤ 30 V