Improper Modification On Positioner 6Dr5; Requirements For Special Applications - Siemens SIPART PS2 Series Operating Instructions Manual

2.7

Improper modification on positioner 6DR5...6

Improper modification on positioner 6DR5...6
Danger of explosion. The pneumatic terminal plate on the SIPART PS2 positioner 6DR5..6 is
a safety-related component of the flameproof enclosure.
● Never loosen the screws
Figure 2-1
2.8

Requirements for special applications

Due to the large number of possible applications, each detail of the described device versions
for each possible scenario during commissioning, operation, maintenance or operation in
systems cannot be considered in the instructions. If you need additional information not
covered by these instructions, contact your local Siemens office or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
WARNING
Screws of the pneumatic terminal plate on the positioner 6DR5..6
2.8 Requirements for special applications
①
of the pneumatic terminal plate.
Safety information
21