Designated Use; Product Compatibility - Siemens SIPART PS2 Series Operating Instructions Manual

Edition
01/2019
1.4

Designated use

Use the device in accordance with the information on the nameplate and in the Technical data
(Page 239).
1.5

Product compatibility

The following table describes the compatibility between document output, device revision,
engineering system and associated Electronic Device Description (EDD).
Manual Comments
edition
11/2019 New manual
edition
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
Note
● Changes for FW 5.02.00, HART device revision 7
● Ex "nA" (non-sparking equipment) is replaced by Ex "ec" (increased safety)
● Option -Z P01 Extended diagnostics supported by pressure sensors
– Parameter assignment: U.\\PRES (Page 188)
– Diagnostics values: 60.PZ, 63.PZMAX und 64.N_Min (Page 228)
– Online diagnostics: Error codes 17 to 19 (Page 234)
Section "Installing/mounting (Page 37)"
– New markings on the lever with carrier pin (Page 40)
– Revised section "Setting and locking the transmission ratio (Page 48)"
● Section "Pneumatic connection (Page 90)"
– Revised section "Behavior in case of failure of the electrical auxiliary power
and/or the supply pressure PZ (Page 93)"
● Section "Commissioning (Page 105)"
– Revised section "Setting the friction clutch (Page 115)"
● Section "Service and maintenance (Page 197)"
– Section "Replacing the basic electronics" with the "Fail in Place" function has
been revised and is now called "Replace basic electronics (Page 200)"
– New section "Replace pneumatic block (Page 202)" and "Replace the pres‐
sure sensor module (Page 203)"
● Section "Technical data (Page 239)"
– Explosion protection (Page 243) restructured and contains a breakdown of
the article number
● Section "Spare parts/accessories/scope of delivery (Page 261)" extended
Device revision
FW: 5.02.00 or higher
Device revision 7 or higher
Compatible version of device integration package
SIMATIC PDM V9.0
SIMATIC PDM V8.2 SP1
AMS Device Manager V12.5
SITRANS DTM V4.1
Field communicator
Introduction
1.5 Product compatibility
EDD: 23.00.00 or higher
EDD: 23.00.00 or higher
EDD: 23.00.00 or higher
EDD: 23.00.00 or higher
EDD: 23.00.00 or higher
15