Siemens SIPART PS2 Series Operating Instructions Manual page 142

Parameter assignment
8.3 Tabular overview of the parameters
Overview parameter J
Parameter Function
J. TMAX Monitoring of upper limit temperature with the following parameters:
J1.TUNIT Temperature unit
J2.LEVL1 Threshold 1
J3.LEVL2 Threshold 2
J4.LEVL3 Threshold 3
Overview parameter L
Parameter Function
L. STRK Monitoring of number of total strokes with the following parameters:
L1. LIMIT Limit
L2.FACT1 Factor 1
L3.FACT2 Factor 2
L4.FACT3 Factor 3
Overview parameter O
Parameter Function
O. DCHG Monitoring of number of changes in direction with the following parameters:
O1.LIMIT Limit
O2.FACT1 Factor 1
O3.FACT2 Factor 2
O4.FACT3 Factor 3
Overview parameter P
Parameter Function
P. PAVG Monitoring of position average value with the following parameters:
P1.TBASE Time basis of average value generation
P2.STATE Status of monitoring of position average value IdLE / rEF / ###.# / Strt
P3.LEVL1 Threshold 1
P4.LEVL2 Threshold 2
P5.LEVL3 Threshold 3
142
Parameter values
°C °F
-40 ... 75 ... 90 -40 ... 194
-40 ... 80 ... 90 -40 ... 194
-40 ... 90 -40 ... 194
Parameter values
1 ... 1E6 ... 1E8
0.1 ... 1.0 ... 40.0
0.1 ... 2.0 ... 40.0
0.1 ... 5.0 ... 40.0
Parameter values
1 ... 1E6 ... 1E8
0.1 ... 1.0 ... 40.0
0.1 ... 2.0 ... 40.0
0.1 ... 5.0 ... 40.0
Parameter values
0.5h / 8h / 5d / 60d / 2.5y
0.1 ... 2.0 ... 100.0
0.1 ... 5.0 ... 100.0
0.1 ... 10.0 ... 100.0
Operating Instructions, 11/2019, A5E00074631-AE
Unit
°C/°F
Unit
Unit
Unit
%
%
%
SIPART PS2 with 4 to 20 mA/HART