Speakers - HP Chromebook x360 12b Maintenance And Service Manual

Speakers

Table 5-8 Speakers description and spare part number information
Description
Speaker Kit (includes left and right speakers, cables, and 2 rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. WLAN module (see
c. System board (see
Remove the speakers:
1. Release the webcam/microphone module cable from the retention clip (1) and routing channel built into
the speakers.
2. Remove the speakers (2).
NOTE:
These isolators are critical to the performance of the speakers. The absence of these isolators or damage
to them can degrade the speakers performance.
Reverse this procedure to install the speakers.
Bottom cover on page
Battery on page
WLAN module on page
System board on page
When removing the speakers, make note of the location and condition of the rubber isolators (3).
22), and then remove the following components:
24)
25)
40)
Spare part number
L70829-001
Component replacement procedures 45