Removal And Replacement Procedures; Component Replacement Procedures; Bottom Cover - HP Chromebook Enterprise x360 14E G1 Maintenance And Service Manual

5

Removal and replacement procedures

CAUTION:
Accessing these parts can damage the computer or void the warranty.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts this your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.

Component replacement procedures

There are as many as 40 screws that must be removed, replaced, and/or loosened when servicing the computer.
Make special note of each screw size and location during removal and replacement.

Bottom cover

Table 5-1 Bottom cover spare part information
Description
Bottom cover
Remove the bottom cover:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Close the computer and position it upside down.
5. Remove the two rubber feet (1).
The rubber feet are included in the Rubber Kit, spare part number L50835-001.
6. Remove the five Phillips M2.5×8.0 screws (2) that secure the bottom cover to the keyboard/top cover.
22 Chapter 5 Removal and replacement procedures
Components described in this chapter should only be accessed by an authorized service provider.
Spare part number
L50830-001