Heat Sink Assembly - HP 470 G7 Maintenance And Service Manual

Heat sink assembly

Table 6-15 Heat sink assembly description and part number
Description
Heat sink
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the heat sink assembly:
1. In the order indicated on the heat sink assembly, remove the six Phillips M2.0 × 3.0 screws (1) that
secure the heat sink to the computer.
2. Lift the heat sink assembly from the computer (2).
(Preparation for disassembly on page
Optical drive (select products only) on page
Bottom cover on page
Battery on page 31).
25).
26).
29).
Component replacement procedures
Spare part number
L22531-001
49