Bottom Cover - HP 470 G7 Maintenance And Service Manual

Bottom cover

Table 6-1 Bottom cover description and part number
Description
Bottom cover for use in models with an optical drive
Bottom cover for use in models without an optical drive
Computer feet (front and rear)
1. Prepare the computer for disassembly
2. Remove the optical drive (see
Remove the bottom cover:
1. Peel the rubber feet off the bottom of the computer (1).
2. Remove the 10 Phillips M2.5 × 6.0 screws (2).
3. (Optical drive models only) Remove the two Phillips broad head M2.0 × 2.0 screws (3) from the optical
drive bay.
(Preparation for disassembly on page
Optical drive (select products only) on page
Spare part number
L83726-001
L83725-001
L83731-001
25).
26).
Component replacement procedures 29