SolarEdge StorEdge Installation Manual page 28

a. Mark the location of the bracket screw for the Connection Unit, and optionally
the two additional bracket holes.
b. Remove the inverter from the wall/ pole.
c. Drill the hole for the Connection Unit bracket.
d. Hang the inverter on the mounted brackets.
e. Fasten the Connection Unit bracket using a standard bolt.
7. Insert the screws at the top of the inverter brackets and fasten the brackets together.
8. Verify that all the brackets are firmly attached to the mounting surface.
StorEdge Single Phase Inverter with HD-Wave Technology MAN-01-00627-1.1
Figure 11: Connection Unit bracket
Chapter 3: Installing the Inverter 27