Mounting The Inverter - SolarEdge StorEdge Installation Manual

24 Mounting the Inverter

Mounting the Inverter

The inverter is supplied with a mounting bracket kit:
NOTE
Make sure the mounting surface or structure can support the weight of the
inverter.
CAUTION!
SolarEdge inverters and power optimizers can be installed at a minimum
distance of 50 m/ 164 ft from the shoreline of an ocean or other saline
environment, as long as there are no direct salt water splashes on the inverter or
power optimizer.
1. Determine the inverter mounting location, on a wall, stud framing or pole. It is
recommended to mount the inverter in a location protected from direct sunlight.
StorEdge Single Phase Inverter with HD-Wave Technology MAN-01-00627-1.1
Figure 8: Mounting bracket