Inverter Interfaces - SolarEdge StorEdge Installation Manual

20 Inverter Interfaces

Inverter Interfaces

The following figure shows the inverter connectors and components, located at the
bottom of the inverter.
DC input: MC4 connector, for connection of the PV installation.
Two communication glands: for connection of inverter communication options.
Each gland has three openings. Refer to Setting Up Communication to the
Monitoring Platform on page 53 for more information.
ON/OFF/P switch:
ON (1) - Turning this switch ON (after optimizer pairing) starts the operation of
the power optimizers, enables power production and allows the inverter to
begin exporting power to the utility grid.
OFF (0) - Turning this switch OFF reduces the power optimizer voltage to a low
safety voltage and inhibits exportation of power. When this switch is OFF, the
control circuitry remains powered up.
StorEdge Single Phase Inverter with HD-Wave Technology MAN-01-00627-1.1
Figure 5: Inverter Interfaces
Figure 6: ON/OFF/P switch