Step 1: Mounting The Power Optimisers; Step 2: Connecting A Pv Module To A Power Optimizer - SolarEdge StorEdge Installation Manual

16 Step 1: Mounting the Power Optimisers
ensure the power optimizers are not be exposed to temperatures outside their
specifications.

Step 1: Mounting the Power Optimisers

For each of the power optimizers
1. Determine the power optimizer mounting location and use the power
optimizer mounting brackets to attach the power optimizer to the
support structure . It is recommended to mount the power optimizer
in a location protected from direct sunlight. For frame-mounted
power optimizers follow the instructions supplied with the optimizers,
or refer to https://www.solaredge.com/sites/default/files/installing_frame_
mounted_power_optimizers.pdf.
2. If required, mark the mounting hole locations and drill the hole.
CAUTION!
Drilling vibrations may damage the power optimizer and will void the
warranty. Use a torque wrench or an electric drill with adjustable clutch that
meets the mounting torque requirements. Do not use impact drivers for
mounting the power optimizer.
Do not drill through the power optimizer or through the mounting holes.
3. Attach each power optimizer to the rack using M6 (1/4'') stainless steel bolts, nuts
and washers or other appropriate mounting hardware. Apply torque of 9-10 N*m /
6.5-7 lb*ft.
4. Verify that each power optimizer is securely attached to the model support structure.
5. Record power optimizer serial numbers and locations, as described in Reporting and
Monitoring Installation Data on page 49.

Step 2: Connecting a PV Module to a Power Optimizer

NOTE
Images are for illustration purposes only. Refer to the label on the product to
identify the plus and minus input and output connectors.
For each of the power optimizers:
(1) Not applicable to smart models.
StorEdge Single Phase Inverter with HD-Wave Technology MAN-01-00627-1.1
(1)
: