Key Features - Algo 8190S User Manual

Key Features

SIP Extensions
The 8190S connects to an on-premise or hosted communication server in the same way
as a SIP telephone. To register the 8190S with the server requires the following
information:
1. IP address (e.g. 192.168.1.1) or domain name (e.g. myserver.com) of the SIP
Server
2. SIP extension (e.g. 3790)
3. Authentication ID
4. Password
The 8190S supports two types of SIP extensions which behave differently – RING and
PAGE. One or both may be used depending on the application. If the RING extension is
called the 8190S will not answer. Instead, it will play the selected WAV file and the light
pattern until the ringing stops. Typically the RING extension is programmed as part of a
hunt group so that it receives a ring signal simultaneously with one or more phones to
function as a loud ringer in noisy or large areas.
If the PAGE extension is called, the 8190S will answer and allow paging over its internal
speaker. When the 8190S answers it will play a configurable tone to the caller so they
know when they can begin speaking. The same tone is also played over the speaker
before the announcement. If Paging to a single 8190S, talkback may be enabled using the
integrated microphone. The audio direction is determined by the speech activity of the
caller.
Speaker Array Technology
The 8190S uses a multi-speaker line array for improved sound distribution in classrooms.
Controlled dispersion in the vertical axis reduces reflections from floor and ceiling and
provides more consistent direct sound levels for listeners at different distances from the
speaker. Wideband G.722 HD codec support provides improved speech intelligibility for
voice paging and audio notification.
Multicasting
Multicast allows multiple units to simultaneously play Ring or Page audio. The 8190S can
be configured as a multicast 'Slave' device to receive audio stream from a multicast
'Master' device. Any number/combination of Algo IP speaker, paging adapter, or strobe
endpoint can be configured as multicast 'Slaves'. This feature provides scalability without
requiring each endpoint Slave to be registered with a SIP extension.
Polycom TM Group Paging
The 8190S support Polycom Group Paging. The 8190S can be added to a Polycom Group
Page so that voice paging is heard over Polycom telephone speakers and overhead
paging simultaneously.
Document 90-00105
03/09/2020
Page 7
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
support@algosolutions.com
(604) 454-3792