Table of Contents
Advertisement
Restore All Settings and Files to Defaults
Resets the device settings (configuration) and all the files in File Manager: certificates,
licenses, and tones to factory default values.
Reboot the Device
Reboots the device.
System Tab – Firmware
Method
Specify whether the firmware files will be downloaded from the local computer or a remote
URL.
Signed Firmware File
Point to the SFW file provided by Algo.
How To Upgrade 8190S SIP Classroom Speaker with Strobe Firmware
1. From the top menu, click on System, then Maintenance.
2. In the Upgrade section, click on Choose File and select the 8190S speaker firmware
file to upload. Note that a SFW file must be loaded.
3. Click Upgrade
4. After the upgrade is complete, confirm that the firmware version has changed (refer
to top right of Control Panel).
Document 90-00105
03/09/2020
Page 50
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
support@algosolutions.com
(604) 454-3792
Advertisement
Table of Contents
