Algo 8190S User Manual page 30

Maximum Tone Duration
Select the maximum tone duration. The tone will be terminated once the maximum time is
reached. Can be configured if 'Play Tone' or 'Make SIP Call with Tone' actions are
enabled.
Allow 2 nd Button Press
If enabled, 2 nd button press will either simply End Call or End and Restart Call. Therefore,
if an input is triggered for the second time (since the first input trigger enables one of the
four actions listed above) the SIP call will either simply be terminated or terminated and
immediately called again.
Action When Tamper Detected (Supervision)
In addition to the main events, the device can be configured with supervision to also
execute one of the above three actions in case the switch goes offline due to wiring failure
or after being tampered with. For example, a tone could sound over the speaker(s), or a
private pre-recorded message could be sent to a specified phone extension. The
supervision configuration options will appear once a relay option with supervision is
selected. See the Electrical Specification section for details on supervision detection
circuit.
Outbound Ring Limit
Typically set to ensure that a call will not reach voicemail. This feature, under 'Outbound
SIP Call Settings', can be used to set a limit on how long the speaker will ring before
timing out.
Ring back Tone
If enabled, under 'Outbound SIP Call Settings', a ringback tone will play over the speaker
during an outbound SIP call, while waiting for the far-end party to answer.
Maximum Call Duration
Select the maximum call length. The call will be terminated once the maximum time is
reached. In the event that a call inadvertently reaches voicemail or gets accidentally left
on hold, this setting ensures that the 8190S returns on-hook.
Output Light
Enable/Disable the blue light on the speaker entirely (keep the light off even when the
speaker is active).
Heartbeat Light
If enabled, the small blue indicator will flash every 30 seconds as visual confirmation that
the 8190S is powered and running.
Output Relay
Triggers the Output Relay when the 8190S is active with an audio event.
Document 90-00105
03/09/2020
Page 30
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
support@algosolutions.com
(604) 454-3792