Algo 8190S User Manual page 26

Polycom phone(s) must also be configured with the "Compatibility" setting
("ptt.compatibilityMode") disabled in order for this codec setting to be applied.
If using a Polycom phone as the Multicast master, a tone may be set for any of the 25
Polycom Groups configured on the Algo device. If an Algo device is used as a Multicast
master, a tone does not have to be set as the Algo master will provide its own tone.
Polycom Group Tones can be set in Advanced Settings > Advanced Multicast tab.
Slave Zones
Select one or more multicast zones for the 8190S SIP Classroom Speaker to monitor.
Note that multicast zone priority is based on the zone definition list order (top to bottom).
Document 90-00105
03/09/2020
Page 26
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
support@algosolutions.com
(604) 454-3792