Basic Settings Tab - Clock; Basic Settings Tab - Strobe; Basic Settings Tab - Multicast - Algo 8190S User Manual

Sip classroom speaker with strobe
Table of Contents

Advertisement

Basic Settings Tab – Clock
Time Format
Display 24 hour or 12 hour on the clock.
Colon blink to seconds
If enabled, the colon between hours and minutes will blink. If disabled the colon will be on
steady.
Clock Brightness Level
Brightness of the LEDs on the clock.
Note: Clock brightness will auto adjust to medium when using PoE. PoE+ is required
for high brightness.
Basic Settings Tab – Strobe
Pattern Definitions
Several different strobe patterns can be configured with a Flash Pattern, Brightness, and
one or two colors.
Configured strobe patterns are named to simplify the selection elsewhere.
On the 8190S a drop down option Strobe Pattern is displayed next to features that allow
patterns to be associated with actions such as page, ring, or multicast.
The 8190S comes with 10 flash patterns:
Steady
Sparkle
Multicolor
Flash Fast
Flash Slow
The 8190S flash patterns are available in 4 different colors:
Amber
Red
Basic Settings Tab – Multicast
Multicast IP Addresses
Each 8190S SIP Classroom Speaker with Strobe has its own IP address, and shares
common multicast IP and port numbers (multicast zone) for multicast packets. The master
Document 90-00105
03/09/2020
Page 23
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
Flash Fast, Alternating Sides
Flash Slow, Alternating Sides
Classic Strobe Fast
Classic Strobe Medium
Classic Strobe Slow
Green
Blue
support@algosolutions.com
(604) 454-3792

Advertisement

Table of Contents
loading

Table of Contents