Basic Settings Tab - Features - Algo 8190S User Manual

Important: Any time changes are made to settings in the web interface the 'Save'
button must be clicked to save the changes.
SIP Domain (Proxy Server)
The IP address (e.g. 192.168.1.1) or domain name (e.g. myserver.com) of the SIP Server
Ring/Alert Mode
Option for enabling/disabling to a Ring/Alert SIP extension. If activated, screen expands to
enter SIP extension parameters for a Ring/Alert Extension.
Ring Extension
This is the SIP extension for the 8190S speaker's Ring parameter. The device will detect
inbound ring events on this extension and flash a light pattern with a tone (and multicast if
required) until the inbound call stops ringing. It will not answer the call on this extension.
Page Extension
This is the SIP extension for the 8190S speaker. The device will auto-answer any inbound
call received on this extension and provide a voice paging path (and multicast if
configured).
Authentication ID
May also be called Username for some SIP servers and in some cases may be the same
as the SIP extension used for the associated Ring and/or Page parameter.
Authentication Password
SIP password provided by the system administrator for the SIP account used for the
associated Ring and/or Page parameter.
Extension to Dial
Phone number to be dialed when the Call button on the device is pressed.
Basic Settings Tab – Features
Ring/Alert Tone
Select WAV file to play when a ring event is detected on the SIP Ring extension. The
WAV file may be played immediately to the speaker from the web interface for test
purposes using the Play, Loop, and Stop buttons.
Document 90-00105
03/09/2020
Page 20
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
support@algosolutions.com
(604) 454-3792