Touchpad Cable - HP Chromebook 11 G8 Education Edition Maintenance And Service Manual

Touchpad cable

NOTE: The touchpad cable is included in the Cable Kit, spare part number L89767-001.
Before removing the touchpad cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the touchpad cable:
1. Turn the keyboard/top cover upside down with the front toward you.
2. Remove the pad (1) that secures the touchpad cable to the keyboard/top cover.
3. Release the ZIF connector (2) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the touchpad.
4. Remove the touchpad cable (3).
Reverse this procedure to install the touchpad cable.
Keyboard/top cover on page 23).
Component replacement procedures 27