TSU9400 Starter’s Guide TSU9400 Starter’s Guide Contents Getting to Know Your Pronto Control Panel Taking a First Look ....................... . . Charging the Control Panel Enjoying Your Pronto Control Panel Controlling Your Home Theater...
Taking a First Look Control Panel QVGA touch screen Cursor keys Rotary wheel Hard keys Power switch Backlight key Page + / Page – keys Docking Station Panel connector Power adapter TSU9400 Starter’s Guide Stylus Firm keys USB connector...
TSU9400 Starter’s Guide Charging the Control Panel When the Battery level icon Depending on how your installer has configured the Control Panel, it can be operated for one to several days. Note The lifetime of the battery depends on the time out settings and the settings of the wireless network configured by your installer. If you notice that the battery is deteriorating, please contact your installer. When you place the Control Panel in the docking station, the red Charging LED on the front of the docking station lights up.
Page 15
Depending on the settings made in the Screen Settings page, the screen is also activated when you: • tilt the Control Panel sufficiently towards you. -or- • press one of the 5 firm keys below the screen or one of the hard keys. Note The following hard keys send out commands to your equipment without activating the screen: Channel Up/Down, Volume Up/Down, Menu, Guide, Power, Mute, Info, Back.
TSU9400 Starter’s Guide Turning the Control Panel On/Off Tip Always switch off the Control Panel during transport to avoid the activation of the touchscreen and battery draining. Changing the Pronto Settings Notes It is possible that your installer has blocked the access to the Settings pages. Normally, your installer has fully programmed your Control Panel and no changes are required. To open the Settings pages: • Press and hold the Settings icon General Tip Press and hold the ‘+’ and ‘–’ buttons to decrease or increase the setting faster. Power switch The Power switch on the left side of the Control Panel turns the Control Panel on and off.
Screen To change the Activation Settings: • Tap the buttons to toggle between the different Activation settings: Pick up sensor: the Control Panel switches on when it is tilted. Firm keys: the Control Panel switches on and/or sends out IR when a firm key is pressed.
TSU9400 Starter’s Guide Cleaning the Control Panel • Use a soft, damp cloth to clean the Control Panel. • If the touch screen is dirty, clean it with a soft cloth moistened with a diluted window-cleaning solution. • Do not use a corrosive detergent or an abrasive sponge. •...
All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner. Royal Philips Electronics is not liable for omissions or for technical or editorial errors in this manual or for damages directly or indirectly resulting from the use of the Pronto Control Panel.
Environmental Information 产品中有毒有害物质或元素的名称及含量 Names and Contents of Toxic or Hazardous Substances or Elements 部件名称 铅 Name of the (Pb, Parts Lead) Remote control × 遥控器 × Receiver & Cables 接收器及电缆 Batteries (Li ion / Li Polymer ) (If applicable) ○ 电池(锂电池)...