BRP Evinrude E-Tec Series Installation Manual page 47

15–30 HP M
ODELS
Use an approp riate chain , at least 36 in ches (91
cm) long with a sna p hook, capable of lifting 500
lbs. (227 kg).
Remove upper motor cover.
A
CAUTION
To avoid damage to the outboard, DO NOT
allow the outboard to fall unrestrained.
Remove chain from lifting tool.
Remove lifting tool from outboard.
Attach chain to lift eye on back of engine block.
A
WARNING
If the chain snap hooks are too large, the
cast in lift eye could break causing the out-
board to drop suddenly causing personal
injury and damaging the outboard.
1
1. Lift eye
Carefully lift engine with hoist.
NOTICE
To avoid damage to the outboard,
lift the outboard in one smooth motion. DO
NOT allow the outboard to bounce.
007212
OUTBOARD INSTALLATION
LIFTING THE OUTBOARD
2
007213
45