Remote Oil Fill Kit (Optional) - BRP Evinrude E-Tec Series Installation Manual

Oil Tank Profiles
1.8 Gallon Tank
P/N 176995

Remote Oil Fill Kit (Optional)

The remot e oil fill kit (P/N
deck-mounted fill tube, cap, a tank-mounted tube,
and nut that replace t he origin al o il t ank cap
assembly.
Installation Recommendations
Select a location on the de ck of the boat that is
•
above the oil tank fill cap.
Select a deck location which allows the required
•
length of 1½ in. I.D. fill hose to route as directly
and as vertically as possible.
Avoid inappropriate hose routin gs tha t cou ld
•
distort the fill tube or tank tube.
Refer to installation instructions provided with
•
remote oil fill kit.
NOTICE
A slanted area of the deck will allow
water to drain away from the fill and is best
suited for the installation.
REMOTE OIL TANK INSTALLATION (V4 – V6)
176461) provide s a
3 Gallon Tank
P/N 176996
Additional Items Required
1½ in . I.D. fill hose cu t to required len gth. Fill
•
hose (P/N 1 23956) is available in 25 ft. (7.6 m)
lengths.
Two corrosion r esistant 2 in. (50
•
clamps.
BOAT RIGGING
1
DRC8123
mm) hose
25