Fuel Flow Requirements - BRP Evinrude E-Tec Series Installation Manual

BOAT RIGGING
FUEL SYSTEM REQUIREMENTS

Fuel Flow Requirements

Fuel tank pickup tube
Fuel fittings
Fuel supply hoses
Fuel tank pickup
screen
Antisiphon valve
Remote fuel filter
Maximum fuel pump
lift height
22
15 – 30 HP
1/4 in. (6.4 mm) min. ID
5/32 in. (4.1 mm) min. ID
1/4 in. (6.4 mm) min. ID
100 mesh, 304 grade stainless steel wire, 0.0045 in. wire diameter, 1 in. (25
mm) long
2.5 in. (63.5 mm) Hg maximum pressure drop at 20 gph (76 l/hr) flow
0.4 in. Hg maximum pressure drop at 20 gph (76 l/hr) flow,
150 in. (1290 cm ) of filter area
2 2
Fuel pump should not be located more than 30 in. (76.2 cm) above bottom of
fuel tank
40 – 90 HP
5/16 in. (7.9 mm) min. ID
1/4 in. (6.4 mm) min. ID
3/8 in. (9.5 mm) min. ID
ALL MODELS
115 – 300 HP
3/8 in. (9.5 mm) min. ID
9/32 in. (7.1 mm) min. ID
3/8 in. (9.5 mm) min. ID