6. PAPER PATH
6.1 STANDARD COPYING
[D]
[F]
[C]
[B]
[E]
[A]
[A]
Paper feed begins from the exterior LCT, by-pass feed table or paper feed
stations in the paper tray unit. The copy paper then follows one of two paths
inside the copier. The path followed depends on which mode the operator
has selected. For copy processing, all sheets follow the same paths from the
paper feed mechanism [A] through the registration rollers [B], transfer belt
[C], and fusing unit [D]. After that, copies are delivered to the sorter bins [E]
or proof tray [F], however, 2 sided copies are diverted for further processing.
STM
1-13
FT6645/6655/6665