Intended Use; Technical Specifications; Important Safety Information - Strongway 61131 Owner's Manual

The Strongway 1300-Lb. Electric Hoist Frame is used to mount an electric hoist to a steel post (not
included) in your shop, warehouse, or garage. The frame mounts to a steel post with up to 2 inches in
diameter.
Property
Arm Length (in.)
Max Capacity (lb.) when the hoist placed outside of the frame
Max Capacity (lb.) when the hoist placed inside of the frame

Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas
may put you dangerously close to cutting tools and rotating parts.

Do not use the hoist frame where there is a risk of causing a fire or an explosion; e.g., in the
presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite
the flammable liquids, gases, or dust.

Do not allow the product to come into contact with an electrical source. The tool is not insulated
and contact will cause electrical shock.

Keep children and bystanders away from the work area while operating the tool. Do not allow

Intended Use

Technical Specifications

Important Safety Information

⚠WARNING
⚠WARNING
WORK AREA SAFETY
Page 4 of 14
Specification
43 1/3
660
1320