Page 1
1300-Lb. Capacity Electric Hoist Frame Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #61131 READ & SAVE THESE INSTRUCTIONS...
Page 2
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 5 Assembly Instructions .......................... 6 Operating Instructions .......................... 9 Maintenance ............................10 Parts Diagram ............................11 Parts List .............................. 11 Replacement Parts ..........................
Intended Use The Strongway 1300-Lb. Electric Hoist Frame is used to mount an electric hoist to a steel post (not included) in your shop, warehouse, or garage. The frame mounts to a steel post with up to 2 inches in diameter.
children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY ...
Do not use to transport or lift people or animals. Operate on a hard, level surface. Do not operate frame if the beam is not level. Keep persons and property clear from under the load. Do not leave loads suspended when the hoist is unattended.
Page 7
Slide the brace (#2) into the upper brackets. Align the holes together and insert the upper bolt (#8) through. Secure using an M6x12 hex bolt (#16). Slide the arm (#1) into the lower brackets. Align the holes together and insert the lower bolt (#7) through.
Page 8
Install the cap (#9) over the end of the arm extension. 8. Slide the arm extension assembly into the arm. Align the holes together. 9. Inset the M12x70 hex bolt (#13) through the aligned holes. Secure using an M12x70 hex bolt, an Ø...
Operating Instructions ⚠WARNING Do not exceed the rated load capacity. Do not use to transport or lift people or animals. Operate on a hard, level surface. Do not operate frame if the beam is not level. ...
Type 2 - Place the hoist in the in the triangle frame. The max capacity is 1322 lb. Maintenance Maintain the hoist frame by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used.
Parts Diagram Parts List Part Number Part Description Quantity Brace Lower Front Bracket Lower Back Bracket Upper Front Bracket Upper Back Bracket Lower Bolt Upper Bolt Ø12 Flat Washer Ø12 Spring Washer M12 Nut M12x70 Hex Bolt M12 x60 Hex Bolt M8x60 Hex Bolt M6x12 Hex Bolt Arm Extension...
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. ...
Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 14
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 14 of 14...